Introduction
This assignment uses two-digit seven-segment display with a 74HC595 8-bit serial-in parallel-out shift register with output latches.
Module
Pin Assignment
| Port | 74HC595 | mikroBUS | 74HC595 | Port | |
|---|---|---|---|---|---|
| - | - | AN | PWM | - | PF2 |
| PF3 | MR | RST | INT | - | - |
| PF4 | STCP | CS | TX | - | - |
| PF7 | SHCP | SCK | RX | - | - |
| PF6 | Q7S | MISO | SCL | - | - |
| PF5 | DS | MOSI | SDA | - | - |
| J1P10 | VCC | +3.3V | +5V | - | - |
| J1P9 | GND | GND | GND | GND | J1P9 |
Movie
Documents
Files
- Board: board.h (source)
- Click: c1201.h (source) c1201.c
- 74HC595: hc595.h (source)
- PWM: pwm.h (source) pwm.c
- SPI: spi.h (source) spi.c
Solution
- Solution: project3.hex
Skills
| Skill | Acquisition | |
|---|---|---|
| 1.1 | Implementing hardware | x |
| 2.1 | Creating a software project | x |
| 2.2 | Using peripheral components | x |
| 2.3 | Implementing interrupts | x |
| 2.4 | Using a communication protocol | x |
