Introduction
This assignment uses a Nokia 5110 monochrome liquid-crystal display with an PCD8544 48×84 pixels matrix LCD controller/driver.
Module
Pin Assignment
| Position | Symbol | Port | Description |
|---|---|---|---|
| 1 | VCC | J1-10 | Supply voltage (3.3 V) |
| 2 | GND | J1-9 | Ground |
| 3 | SCE | PF4 | Chip enable (SS, active low) |
| 4 | RST | PF3 | Reset (active low) |
| 5 | D/C | PF2 | Data/Command |
| 6 | DN | PF5 | Serial data input (MOSI) |
| 7 | SCLK | PF7 | Serial clock input (SCK) |
| 8 | LED | PF1 | Backlight |
Movie
Documents
Files
- Board: board.h (source)
- Module: nokia5110.h (source) nokia5110.c
- Controller: pcd8544.h (source)
- SPI: spi.h (source) spi.c
Solution
- Solution: project6.hex
Skills
| Skill | Acquisition | |
|---|---|---|
| 1.1 | Implementing hardware | x |
| 2.1 | Creating a software project | x |
| 2.2 | Using peripheral components | x |
| 2.3 | Implementing interrupts | x |
| 2.4 | Using a communication protocol | x |
